Toggle clamp is a simple Mechanism which holds instantly. The Toggle Clamps Consist of a handle to operate, a Clamping Arm to Reach the work piece, linkages for multiplying the applied force, and a base for mounting at the workplace on it’s base. The handle is operated which thereby moves the clamping arm to hold the work piece. A required clamping force is achieved and exerted on the work piece. Under this action the Toggle Clamp Holds the work piece firmly and positively.
Vertical Hold Down Action : (VTC- Series)
As the name implies clamps of this type hold the work piece with a downward clamping action. These clamps are manufactured with a holding capacity up to 3000 kgs. The clamping exhibits a minimum of 90o opening angle giving full clearance for loading & unloading of workpiece. Clamping arm can be solid bar, U shaped or fixed hole to suit individual requirements.
Horizontal Hold Down Action : (H- Series)
The holding action in these types of Toggle Clamps is same as VTC-Series clamp. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type.
Straight Line Action : (HTC- Series)
The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load ratings.(45 kgs - 4,500 kgs)
Pull Action Clamps : (PAH-Series)
Steel-Smith's Pull Action Clamps are designed for sealing chambers, doors, mould closures or other such applications requiring closure mechanisms. The handle can be moved to place the clamping U - Bolt Bar hook around the opposing latch & pull down to reach the lock position. The threaded "hook" or "U-bolt” type bar offer an adjustment feature. The clamps can withstand pressures from 150 kgs. to 3000 kgs.
